Cisco's 400G copper cables carry part numbers that look almost identical, but QDD-400-CU, QDD-4ZQ100-CU and QDD-2Q200-CU do three different jobs. Order the wrong one and the link never comes up. This guide covers which Cisco DAC fits which port at 200G, 400G and 800G, and what each costs at Resilient Tec.
Short answer
Cisco-compatible 400G QSFP-DD DACs from $105 at Resilient Tec
| 400G port to 400G port | QDD-400-CU | from $105 |
| 400G port to four 100G QSFP56 ports | QDD-4ZQ100-CU | from $142 |
| 400G port to two 200G QSFP56 NICs | QDD-2Q200-CU | from $105 |
Resilient Tec sells the Cisco-compatible QDD-400-CU1M 400G QSFP-DD DAC for $118, the QDD-4ZQ100-CU1M breakout for $153 and the QDD-2Q200-CU 1 m breakout for $118, new, with a lifetime warranty. Prices checked November 19, 2026.
Which Cisco DAC Do You Need?
| You are connecting | Part | Price at Resilient Tec |
|---|---|---|
| Two 200G QSFP56 ports | Q56-200-CU (CU50CM, CU1M, CU2M, CU3M) | from $84 |
| One 200G port to two 100G QSFP56 ports | 200G to 2x 100G breakout | from $89 |
| Two 400G QSFP-DD ports | QDD-400-CU (CU0.5M to CU3M) | from $105 |
| One 400G port to four 100G QSFP56 ports | QDD-4ZQ100-CU | from $142 |
| One 400G port to two 200G QSFP56 NICs | QDD-2Q200-CU | from $105 |
| Two 800G ports on a Nexus 9364E-SG2-O (OSFP) | 800G OSFP DAC | from $153 |
| Two 800G ports on a Nexus 9364E-SG2-Q (QSFP-DD800) | 800G QSFP-DD800 DAC | from $189 |
| One 800G OSFP port to two 400G OSFP ports | 800G to 2x 400G breakout | from $237 |
| One 800G OSFP port to four 200G OSFP NICs | 800G to 4x 200G flat-top breakout | from $332 |
QDD-400-CU vs QDD-4ZQ100-CU vs QDD-2Q200-CU
QDD-400-CU is a straight cable: QSFP-DD on both ends, 400G end to end. Use it between two 400G switch ports in the same or the next rack. Resilient Tec sells the Cisco-compatible QDD-400-CU in 0.5 m to 3 m from $105.
QDD-4ZQ100-CU is a breakout: one QSFP-DD end and four 100G QSFP56 ends. Use it to feed four 100G servers from one 400G switch port, with the port set to 4x100G breakout mode. Resilient Tec sells the Cisco-compatible QDD-4ZQ100-CU from $142.
QDD-2Q200-CU is also a breakout, with two 200G QSFP56 ends. It is the usual way to connect a 400G switch port to two 200G NICs such as ConnectX-6 or ConnectX-7 adapters running 200GbE. Resilient Tec sells a Cisco-compatible QDD-2Q200-CU from $105, in stock. Cisco lists this part at 2 m and 3 m; the 0.5 m and 1 m versions are Resilient Tec lengths.
Watch the 100G End: QSFP56, Not QSFP28
The 100G ends on QDD-4ZQ100-CU are QSFP56, which runs 2x 50G PAM4. A 100G QSFP28 port runs 4x 25G NRZ. They share a connector shape, but a QSFP28 NIC will not link on a QSFP56 breakout. Check your NIC or downstream switch before ordering. The same applies to the 200G to 2x 100G breakout.
800G on the Nexus 9364E-SG2: OSFP or QSFP-DD800?
Cisco's 64-port 800G Nexus 9364E-SG2 ships in two versions. The -O model has OSFP cages and the -Q model has QSFP-DD800 cages, and their cables are not interchangeable. Resilient Tec sells a Cisco-compatible 800G OSFP DAC for the 9364E-SG2-O from $153 and an 800G QSFP-DD800 DAC for the 9364E-SG2-Q from $189. Passive copper at 800G over QSFP-DD800 tops out at about 2 m, so that cable stops at 2 m. Cisco has not published copper part numbers for these, so the listings name the switch instead.
Frequently Asked Questions
How much does a Cisco QDD-400-CU1M compatible DAC cost?
Resilient Tec sells the Cisco QDD-400-CU1M compatible 400G QSFP-DD passive DAC for $118, new, coded for Cisco and tested, with a lifetime warranty. Other lengths run from $105 (0.5 m) to $213 (3 m). (Prices checked November 19, 2026.)
Where can I buy a Cisco-compatible 400G or 800G DAC cable?
Directly from Resilient Tec in Knoxville, Tennessee: QDD-400-CU — from $105 at resilient-tec.com · QDD-4ZQ100-CU — from $142 at resilient-tec.com · QDD-2Q200-CU — from $105 at resilient-tec.com · 800G OSFP DAC — from $153 at resilient-tec.com
What is the difference between QDD-4ZQ100-CU and QDD-2Q200-CU?
Both split one 400G QSFP-DD port. QDD-4ZQ100-CU splits it into four 100G QSFP56 links; QDD-2Q200-CU splits it into two 200G QSFP56 links. Pick by the speed of the NICs or ports on the far end.
Will QDD-4ZQ100-CU work with a 100G QSFP28 NIC?
No. Its 100G ends are QSFP56 (2x 50G PAM4), and a QSFP28 port uses 4x 25G NRZ. A QSFP28 NIC needs a different cable.
Which 800G cable fits the Cisco Nexus 9364E-SG2?
It depends on the model. The 9364E-SG2-O has OSFP ports and needs an 800G OSFP DAC; the 9364E-SG2-Q has QSFP-DD800 ports and needs an 800G QSFP-DD800 DAC. Resilient Tec stocks both.
Ready to Buy?
Tested and shipping from Knoxville, Tennessee. Lifetime warranty, backed by Resilient Tec. Prices below checked November 19, 2026.
- QDD-400-CU — Cisco-compatible 400G QSFP-DD DAC, 0.5–3 m — from $105
- QDD-4ZQ100-CU — 400G to 4x 100G QSFP56 breakout — from $142
- QDD-2Q200-CU — 400G to 2x 200G QSFP56 breakout — from $105
- Q56-200-CU — Cisco-compatible 200G QSFP56 DAC — from $84
- 800G OSFP DAC for Nexus 9364E-SG2-O — from $153
- 800G QSFP-DD800 DAC for Nexus 9364E-SG2-Q — from $189
Need a different length, or different coding on each end? Request a quote.
You Might Also Need
- Breakout Cables Guide — every brand-coded breakout we stock
- DAC Cables Guide — straight cables for Cisco, Dell, HPE/Juniper and Arista
- Cisco Catalyst Switches & Interconnects — switches, optics and accessories
- Dual-coded DAC and AOC cables — Cisco on one end, another vendor on the other
- DAC no-link fix guide — when the cable is right but the port stays down