Q56-200-CU Cisco Compatible 200G QSFP56 to QSFP56 Passive DAC Cable - 0.5m, 1m, 2m, 3m
Buying 10 or more, or need a different length? Request a volume quote and we'll get back to you within 4 business hours.
Covered for life, on everything we sell.
Not compatible? We'll replace or refund it.
Tested and Shipping from Knoxville, Tennessee
Inspected before it leaves our hands.
Real People, Real Answers
Call 888-442-3849 or request a quote.
Running a different switch? We can have this part coded for Cisco, Arista, Juniper, Dell, HPE, NVIDIA and most other platforms before it ships. Request custom coding or see how coding works.
Condition: New, Cisco compatible
Cisco Q56-200-CU compatible 200G QSFP56 to QSFP56 passive direct attach copper cable, coded for Cisco 200G platforms, in 0.5 m, 1 m, 2 m and 3 m lengths.
Passive copper is the lowest-power, lowest-latency way to connect two 200G ports in the same rack or the next rack over. Past 3 m, use an AOC or optics instead.
Which Length Do I Need?
| Length | Cisco cross-reference |
|---|---|
| 0.5 m | Q56-200-CU50CM |
| 1 m | Q56-200-CU1M |
| 2 m | Q56-200-CU2M |
| 3 m | Q56-200-CU3M |
Technical Specifications
| Specification | Value |
|---|---|
| Cisco cross-reference | Q56-200-CU50CM / CU1M / CU2M / CU3M |
| Form factor | QSFP56 to QSFP56 |
| Data rate | 200Gb/s, 4x 50G PAM4 |
| Standard | 200GBASE-CR4, QSFP56 MSA |
| Cable type | Passive twinax copper |
| Lengths | 0.5 m, 1 m, 2 m, 3 m |
| Condition | New, Cisco compatible |
| Warranty | Lifetime, backed by Resilient Tec |
Good to Know
- QSFP56 runs 4x 50G PAM4. A 100G QSFP28 port (4x 25G NRZ) is a different interface and will not run this cable at 200G.
- Coded for Cisco and tested before it ships. Tested and shipping from Knoxville, Tennessee.
- Need it coded for a different platform, or dual-coded? Request a quote.
Warranty: lifetime, backed by Resilient Tec.
Buying 10 or more, or need a different length? Request a volume quote and we'll get back to you within 4 business hours.
Running a different switch? We can have this part coded for Cisco, Arista, Juniper, Dell, HPE, NVIDIA and most other platforms before it ships. Request custom coding or see how coding works.
Condition: New, Cisco compatible
Cisco Q56-200-CU compatible 200G QSFP56 to QSFP56 passive direct attach copper cable, coded for Cisco 200G platforms, in 0.5 m, 1 m, 2 m and 3 m lengths.
Passive copper is the lowest-power, lowest-latency way to connect two 200G ports in the same rack or the next rack over. Past 3 m, use an AOC or optics instead.
Which Length Do I Need?
| Length | Cisco cross-reference |
|---|---|
| 0.5 m | Q56-200-CU50CM |
| 1 m | Q56-200-CU1M |
| 2 m | Q56-200-CU2M |
| 3 m | Q56-200-CU3M |
Technical Specifications
| Specification | Value |
|---|---|
| Cisco cross-reference | Q56-200-CU50CM / CU1M / CU2M / CU3M |
| Form factor | QSFP56 to QSFP56 |
| Data rate | 200Gb/s, 4x 50G PAM4 |
| Standard | 200GBASE-CR4, QSFP56 MSA |
| Cable type | Passive twinax copper |
| Lengths | 0.5 m, 1 m, 2 m, 3 m |
| Condition | New, Cisco compatible |
| Warranty | Lifetime, backed by Resilient Tec |
Good to Know
- QSFP56 runs 4x 50G PAM4. A 100G QSFP28 port (4x 25G NRZ) is a different interface and will not run this cable at 200G.
- Coded for Cisco and tested before it ships. Tested and shipping from Knoxville, Tennessee.
- Need it coded for a different platform, or dual-coded? Request a quote.
Warranty: lifetime, backed by Resilient Tec.