Juniper to MikroTik Dual-Coded 10G SFP+ Passive DAC Cable — 2m, JNP-MKT-10G-DAC-2M-C
Warranty: Lifetime
Juniper on one end, MikroTik on the other — a 10G link that both boxes accept
JNP-MKT-10G-DAC-2M-C — 10G SFP+ to SFP+ passive DAC, Juniper / MikroTik dual-coded, 2m
→ Built for Juniper switch to MikroTik router. Customers use it from a Juniper QFX5100-48S to a MikroTik CCR2116-12G-4S+. Send us both models and we will confirm before it ships.
SKU: JNP-MKT-10G-DAC-2M-C
Description: 10G SFP+ passive direct-attach copper cable, Juniper coding on end A and MikroTik coding on end B, 2 m
This SFP+ twinax cable runs 10G between a Juniper switch and a MikroTik router or switch. Each end carries the coding its host expects.
Dual-coded means each end identifies as its own vendor. The Juniper end presents Juniper coding to the switch; the other end presents coding for the device it plugs into. That avoids unsupported-transceiver errors on both sides.
Which One Do I Need?
| Connecting | Part |
|---|---|
| Juniper to MikroTik, 10G, up to 2 m | JNP-MKT-10G-DAC-2M-C — this listing |
| Juniper to NVIDIA/Mellanox, 10G, 3 m | JNP-MLNX-10G-DAC-3M-C |
| MikroTik to MikroTik | MikroTik DAC cable guide |
Technical Specifications
| Specification | Value |
|---|---|
| SKU | JNP-MKT-10G-DAC-2M-C |
| Ends | SFP+ to SFP+ |
| Data rate | 10 Gb/s |
| Cable type | Passive twinax copper |
| Length | 2 m (6.6 ft) |
| Coding | End A: Juniper · End B: MikroTik |
| Typical use | Juniper QFX5100-48S to MikroTik CCR2116-12G-4S+ |
| Condition | New |
| Warranty | Lifetime, backed by Resilient Tec |
Source: Juniper Pathfinder hardware specifications for Juniper passive DACs (JNP-100G-DAC-3M, QFX-SFP-DAC-3M). Coding and end-to-end testing by Resilient Tec.
Good to Know
- Orientation matters. The Juniper-coded end goes in the Juniper switch. Ends are labeled.
- Why dual coding. The Juniper switch checks the transceiver coding on its end, so that end must be Juniper-coded.
Quick Checklist — Is This the Right Cable?
You are linking a Juniper switch to a MikroTik device at 10G. The ports are within 2 m.
Availability
New, coded and tested · Ships from Resilient Tec in Knoxville, TN · Free standard shipping on US orders.
We confirm stock and lead time with you before an order ships. Need a different length, or different coding on each end? We build dual-coded cables to order. Request a quote →
Warranty: lifetime, backed by Resilient Tec — not a manufacturer term. When something fails you reach a named seller in the US, not a ticket queue.
You Might Also Need
- MikroTik CRS312-4C+8XG-RM — 10GbE switch
- MikroTik DAC cable guide
Related Guides
Juniper on one end, MikroTik on the other — a 10G link that both boxes accept
JNP-MKT-10G-DAC-2M-C — 10G SFP+ to SFP+ passive DAC, Juniper / MikroTik dual-coded, 2m
→ Built for Juniper switch to MikroTik router. Customers use it from a Juniper QFX5100-48S to a MikroTik CCR2116-12G-4S+. Send us both models and we will confirm before it ships.
SKU: JNP-MKT-10G-DAC-2M-C
Description: 10G SFP+ passive direct-attach copper cable, Juniper coding on end A and MikroTik coding on end B, 2 m
This SFP+ twinax cable runs 10G between a Juniper switch and a MikroTik router or switch. Each end carries the coding its host expects.
Dual-coded means each end identifies as its own vendor. The Juniper end presents Juniper coding to the switch; the other end presents coding for the device it plugs into. That avoids unsupported-transceiver errors on both sides.
Which One Do I Need?
| Connecting | Part |
|---|---|
| Juniper to MikroTik, 10G, up to 2 m | JNP-MKT-10G-DAC-2M-C — this listing |
| Juniper to NVIDIA/Mellanox, 10G, 3 m | JNP-MLNX-10G-DAC-3M-C |
| MikroTik to MikroTik | MikroTik DAC cable guide |
Technical Specifications
| Specification | Value |
|---|---|
| SKU | JNP-MKT-10G-DAC-2M-C |
| Ends | SFP+ to SFP+ |
| Data rate | 10 Gb/s |
| Cable type | Passive twinax copper |
| Length | 2 m (6.6 ft) |
| Coding | End A: Juniper · End B: MikroTik |
| Typical use | Juniper QFX5100-48S to MikroTik CCR2116-12G-4S+ |
| Condition | New |
| Warranty | Lifetime, backed by Resilient Tec |
Source: Juniper Pathfinder hardware specifications for Juniper passive DACs (JNP-100G-DAC-3M, QFX-SFP-DAC-3M). Coding and end-to-end testing by Resilient Tec.
Good to Know
- Orientation matters. The Juniper-coded end goes in the Juniper switch. Ends are labeled.
- Why dual coding. The Juniper switch checks the transceiver coding on its end, so that end must be Juniper-coded.
Quick Checklist — Is This the Right Cable?
You are linking a Juniper switch to a MikroTik device at 10G. The ports are within 2 m.
Availability
New, coded and tested · Ships from Resilient Tec in Knoxville, TN · Free standard shipping on US orders.
We confirm stock and lead time with you before an order ships. Need a different length, or different coding on each end? We build dual-coded cables to order. Request a quote →
Warranty: lifetime, backed by Resilient Tec — not a manufacturer term. When something fails you reach a named seller in the US, not a ticket queue.
You Might Also Need
- MikroTik CRS312-4C+8XG-RM — 10GbE switch
- MikroTik DAC cable guide