MCP7Y50-N001 Compatible 800G OSFP to 4x200G OSFP Breakout DAC Cable - 1M | NVIDIA / Mellanox
Warranty: Lifetime
800G OSFP to 4x200G OSFP Passive Breakout DAC Cable — Pre-Tested for NVIDIA / Mellanox
The MCP7Y50-N001 is an 800G OSFP to 4x200G OSFP passive breakout DAC cable built for next-generation AI clusters, hyperscale data centers, and NDR InfiniBand fabrics. It delivers 800Gbps aggregate throughput by splitting a single 800G OSFP port into four independent 200G OSFP connections — with zero active components, zero power draw, and zero latency overhead. Every unit is pre-programmed with EEPROM compatibility data and validated before shipment.
Will This Cable Work With My Platform?
Pre-coded for seamless plug-and-play recognition on:
- NVIDIA Quantum-2 / NDR InfiniBand switches (QM9700 series and compatible)
- NVIDIA Spectrum-4 Ethernet switches with 800G OSFP ports
- NVIDIA DGX / HGX systems and GPU-to-switch interconnects
- Any OSFP MSA-compliant platform supporting 800GbE or NDR InfiniBand
Not sure if this matches your exact setup? Contact us before you buy — our engineers will confirm compatibility for free.
Why OSFP Breakout DAC for AI Infrastructure?
| Feature | DAC (This Cable) | AOC | Transceivers + Fiber |
|---|---|---|---|
| Cost | ✅ Lowest | Medium | Highest |
| Latency | ✅ Ultra-low (passive) | Low | Higher |
| Power Draw | ✅ 0W (passive) | Medium | High |
| Heat in Rack | ✅ None | Some | Significant |
| Best Distance | Up to 1 meter | Up to 100m | Long-range |
Best for: GPU-to-switch, switch-to-switch, and top-of-rack breakout connections in high-density AI and HPC environments.
Designed for AI & HPC Infrastructure
- GPU cluster interconnects — spine-to-GPU or switch-to-DGX/HGX connections
- NDR InfiniBand fabrics — 800G port breakout to 4x200G NDR endpoints
- AI training and inference at scale — maximize throughput, minimize latency between nodes
- Hyperscale data center leaf-spine — high-density 800G port utilization
- High-throughput storage — NVMe over Fabric, GPUDirect Storage at 200G per lane
Common Mistakes This Cable Prevents
- Buying AOC when DAC is sufficient — for 1-meter runs, passive DAC is lower cost, lower latency, and zero power
- OEM-locked cables causing recognition failures — our EEPROM pre-coding eliminates firmware rejection
- Wrong connector type — OSFP and QSFP-DD are not the same; always verify your port type before ordering
- Latency spikes from active components — passive DAC has no signal processing, no added jitter
Technical Specifications
- Part Number: MCP7Y50-N001
- Data Rate: 800Gb/s aggregate (4x200Gb/s breakout)
- Connector Type: OSFP (800G) to 4x OSFP (200G each)
- Cable Length: 1 Meter
- Cable Type: Passive Direct Attach Copper (DAC)
- Wire Gauge: 30AWG Twinax
- Power Consumption: Passive (0W)
- Operating Temperature: 0°C to 70°C
- Standards: OSFP MSA compliant
- Protocol Support: NDR InfiniBand (800Gb/s), 800GbE
The Resilient Tec Guarantee
- ✅ Pre-programmed EEPROM — recognized immediately by compatible platforms
- ✅ Compatibility-tested before every shipment
- ✅ Lifetime warranty on all cables
- ✅ Talk to a real engineer — not a chatbot
We don't just ship cables. We make sure they work in your environment.
Related Products
- 400G QSFP-DD to 4x100G QSFP28 Breakout DAC Cables
- 200G QSFP56 to 2x100G QSFP56 Breakout DAC Cables
- 800G OSFP Active Optical Cables (AOC) for longer runs
- OSFP Transceivers for 800G platforms
800G OSFP to 4x200G OSFP Passive Breakout DAC Cable — Pre-Tested for NVIDIA / Mellanox
The MCP7Y50-N001 is an 800G OSFP to 4x200G OSFP passive breakout DAC cable built for next-generation AI clusters, hyperscale data centers, and NDR InfiniBand fabrics. It delivers 800Gbps aggregate throughput by splitting a single 800G OSFP port into four independent 200G OSFP connections — with zero active components, zero power draw, and zero latency overhead. Every unit is pre-programmed with EEPROM compatibility data and validated before shipment.
Will This Cable Work With My Platform?
Pre-coded for seamless plug-and-play recognition on:
- NVIDIA Quantum-2 / NDR InfiniBand switches (QM9700 series and compatible)
- NVIDIA Spectrum-4 Ethernet switches with 800G OSFP ports
- NVIDIA DGX / HGX systems and GPU-to-switch interconnects
- Any OSFP MSA-compliant platform supporting 800GbE or NDR InfiniBand
Not sure if this matches your exact setup? Contact us before you buy — our engineers will confirm compatibility for free.
Why OSFP Breakout DAC for AI Infrastructure?
| Feature | DAC (This Cable) | AOC | Transceivers + Fiber |
|---|---|---|---|
| Cost | ✅ Lowest | Medium | Highest |
| Latency | ✅ Ultra-low (passive) | Low | Higher |
| Power Draw | ✅ 0W (passive) | Medium | High |
| Heat in Rack | ✅ None | Some | Significant |
| Best Distance | Up to 1 meter | Up to 100m | Long-range |
Best for: GPU-to-switch, switch-to-switch, and top-of-rack breakout connections in high-density AI and HPC environments.
Designed for AI & HPC Infrastructure
- GPU cluster interconnects — spine-to-GPU or switch-to-DGX/HGX connections
- NDR InfiniBand fabrics — 800G port breakout to 4x200G NDR endpoints
- AI training and inference at scale — maximize throughput, minimize latency between nodes
- Hyperscale data center leaf-spine — high-density 800G port utilization
- High-throughput storage — NVMe over Fabric, GPUDirect Storage at 200G per lane
Common Mistakes This Cable Prevents
- Buying AOC when DAC is sufficient — for 1-meter runs, passive DAC is lower cost, lower latency, and zero power
- OEM-locked cables causing recognition failures — our EEPROM pre-coding eliminates firmware rejection
- Wrong connector type — OSFP and QSFP-DD are not the same; always verify your port type before ordering
- Latency spikes from active components — passive DAC has no signal processing, no added jitter
Technical Specifications
- Part Number: MCP7Y50-N001
- Data Rate: 800Gb/s aggregate (4x200Gb/s breakout)
- Connector Type: OSFP (800G) to 4x OSFP (200G each)
- Cable Length: 1 Meter
- Cable Type: Passive Direct Attach Copper (DAC)
- Wire Gauge: 30AWG Twinax
- Power Consumption: Passive (0W)
- Operating Temperature: 0°C to 70°C
- Standards: OSFP MSA compliant
- Protocol Support: NDR InfiniBand (800Gb/s), 800GbE
The Resilient Tec Guarantee
- ✅ Pre-programmed EEPROM — recognized immediately by compatible platforms
- ✅ Compatibility-tested before every shipment
- ✅ Lifetime warranty on all cables
- ✅ Talk to a real engineer — not a chatbot
We don't just ship cables. We make sure they work in your environment.
Related Products
- 400G QSFP-DD to 4x100G QSFP28 Breakout DAC Cables
- 200G QSFP56 to 2x100G QSFP56 Breakout DAC Cables
- 800G OSFP Active Optical Cables (AOC) for longer runs
- OSFP Transceivers for 800G platforms