MCP7H50-H001R30 Compatible 200G QSFP56 to 2x100G QSFP56 Breakout DAC Cable - 1M | Mellanox / NVIDIA
Warranty: Lifetime
200G QSFP56 to 2x100G QSFP56 Passive Breakout DAC Cable — Pre-Tested for Mellanox / NVIDIA
The MCP7H50-H001R30 is a 200G QSFP56 to 2x100G QSFP56 passive breakout DAC cable engineered for high-density spine-leaf networks, AI/HPC clusters, and hyperscale data centers. Every unit is pre-programmed with EEPROM compatibility data and validated before shipment — so it works the moment you plug it in.
Will This Cable Work With My Switch?
This cable is pre-coded for seamless plug-and-play recognition on:
- Mellanox / NVIDIA Spectrum switches (SN2700, SN3800, SN4600 series)
- NVIDIA Quantum InfiniBand platforms (HDR InfiniBand 200Gb/s)
- Any MSA-compliant QSFP56 port supporting 200GbE or HDR InfiniBand
Not sure about your exact switch model? Contact us before you buy — we'll confirm compatibility for free.
DAC vs AOC vs Transceivers — Which Should You Use?
| Feature | DAC (This Cable) | AOC | Transceivers |
|---|---|---|---|
| Cost | ✅ Lowest | Medium | Highest |
| Latency | ✅ Ultra-low (passive) | Low | Higher |
| Power Draw | ✅ 0W (passive) | Medium | High |
| Best Distance | Up to 1 meter | Up to 100m | Long-range |
Best for: intra-rack and top-of-rack breakout connections where cost, latency, and power efficiency matter.
Ideal Use Cases
- GPU cluster interconnects for AI training and inference workloads
- High-throughput storage networking (NVMe over Fabric, RDMA)
- Spine-to-leaf breakout in hyperscale and enterprise data centers
- HDR InfiniBand environments requiring 200Gb/s port splitting
Common Mistakes This Cable Prevents
- Overspending on optics when passive DAC is sufficient for 1-meter runs
- Compatibility failures from OEM-locked or uncoded cables
- Latency overhead introduced by active components in short-distance links
Technical Specifications
- Part Number: MCP7H50-H001R30
- Data Rate: 200Gb/s (2x100Gb/s breakout)
- Connector Type: QSFP56 to 2x QSFP56
- Cable Length: 1 Meter
- Cable Type: Passive Direct Attach Copper (DAC)
- Wire Gauge: 30AWG Twinax
- Power Consumption: Passive (0W)
- Operating Temperature: 0°C to 70°C
- Standards: QSFP56 MSA compliant
- Protocol Support: HDR InfiniBand, 200GbE
The Resilient Tec Guarantee
- ✅ Pre-programmed EEPROM — recognized immediately by compatible switches
- ✅ Compatibility-tested before every shipment
- ✅ Lifetime warranty on all cables
- ✅ Talk to a real engineer — not a chatbot
We don't just ship cables. We make sure they work in your environment.
Related Products
- 200G QSFP56 DAC Cables (other lengths)
- 100G QSFP28 Breakout DAC Cables
- 400G QSFP-DD / OSFP DAC Cables
- 200G QSFP56 Active Optical Cables (AOC) for longer runs
200G QSFP56 to 2x100G QSFP56 Passive Breakout DAC Cable — Pre-Tested for Mellanox / NVIDIA
The MCP7H50-H001R30 is a 200G QSFP56 to 2x100G QSFP56 passive breakout DAC cable engineered for high-density spine-leaf networks, AI/HPC clusters, and hyperscale data centers. Every unit is pre-programmed with EEPROM compatibility data and validated before shipment — so it works the moment you plug it in.
Will This Cable Work With My Switch?
This cable is pre-coded for seamless plug-and-play recognition on:
- Mellanox / NVIDIA Spectrum switches (SN2700, SN3800, SN4600 series)
- NVIDIA Quantum InfiniBand platforms (HDR InfiniBand 200Gb/s)
- Any MSA-compliant QSFP56 port supporting 200GbE or HDR InfiniBand
Not sure about your exact switch model? Contact us before you buy — we'll confirm compatibility for free.
DAC vs AOC vs Transceivers — Which Should You Use?
| Feature | DAC (This Cable) | AOC | Transceivers |
|---|---|---|---|
| Cost | ✅ Lowest | Medium | Highest |
| Latency | ✅ Ultra-low (passive) | Low | Higher |
| Power Draw | ✅ 0W (passive) | Medium | High |
| Best Distance | Up to 1 meter | Up to 100m | Long-range |
Best for: intra-rack and top-of-rack breakout connections where cost, latency, and power efficiency matter.
Ideal Use Cases
- GPU cluster interconnects for AI training and inference workloads
- High-throughput storage networking (NVMe over Fabric, RDMA)
- Spine-to-leaf breakout in hyperscale and enterprise data centers
- HDR InfiniBand environments requiring 200Gb/s port splitting
Common Mistakes This Cable Prevents
- Overspending on optics when passive DAC is sufficient for 1-meter runs
- Compatibility failures from OEM-locked or uncoded cables
- Latency overhead introduced by active components in short-distance links
Technical Specifications
- Part Number: MCP7H50-H001R30
- Data Rate: 200Gb/s (2x100Gb/s breakout)
- Connector Type: QSFP56 to 2x QSFP56
- Cable Length: 1 Meter
- Cable Type: Passive Direct Attach Copper (DAC)
- Wire Gauge: 30AWG Twinax
- Power Consumption: Passive (0W)
- Operating Temperature: 0°C to 70°C
- Standards: QSFP56 MSA compliant
- Protocol Support: HDR InfiniBand, 200GbE
The Resilient Tec Guarantee
- ✅ Pre-programmed EEPROM — recognized immediately by compatible switches
- ✅ Compatibility-tested before every shipment
- ✅ Lifetime warranty on all cables
- ✅ Talk to a real engineer — not a chatbot
We don't just ship cables. We make sure they work in your environment.
Related Products
- 200G QSFP56 DAC Cables (other lengths)
- 100G QSFP28 Breakout DAC Cables
- 400G QSFP-DD / OSFP DAC Cables
- 200G QSFP56 Active Optical Cables (AOC) for longer runs